The Eurosand L offers a wide range of solutions for all sanding operations. The machine is available in several configurations with 2,3 or 4 sanding units and independent motors where required. The numerous options available mean that Eurosand L can be set up for calibrating, pre-sanding, sanding and finishing of many component types including painted panels.
Working units and main options
basic modules for 2, 3 or 4 longitudinal units calibrating/sanding unit with Ø160, Ø200, Ø250 or Ø320 mm diameter rollerspad sanding unit combi unit with 175 mm diameter roller and sanding pad CHP cutter head planer unitTAC-S crossbelt unit with EPICS electronic sectional pad grooved steel or rubber coated calibrating/sanding rollers EPICS electronic sectional pad (segments resolution: 30 or 60 mm)pneumatic ON/OFF cylinders for working units positioning abrasive belt reverse rotation oscillating blowers for belt cleaning uprated main motors independent motors for each unit floating pressure bars vacuum hold-down tablecleaning and buffing rollers panel cleaning unit with rotating blowers constant pass-line at 900 mm from floor level electronic worktable positioner wireless electronic gauge”Hydra V-Pad” electronic control
Eurosand L can be equipped with a 320 mm roller in the last position. The large diameter of the roller, coated with soft rubber, ensures a large contact surface with the workpiece and improved cooling of the sanding belt. These are two factors that guarantee a top quality finish. Thanks to the long stroke of the cylinder pistons and the double-acting system (pneumatically controlled push/pull), the electronic sectional EPICS pad guarantees maximum sensitivity and precision for all types of application.The wireless, high-precision electronic gauge measures the thickness of the workpiece and transmits the reading to the Hydra controller in real time. The wireless link and possibility of starting work programs directly from the gauge makes the controller simple and easy to use.
|Min/max working thickness (mobile table)||mm||4÷170|
|Min/max working thickness (constant pass-line)||mm||4÷200|
|Sanding belt length (longitudinal units)||mm||2620|
|Sanding belt width (longitudinal units)||mm||1115||1370|
|Sanding belt length (cross unit)||mm||–||4900|
|Max motor power (longitudinal unit)||kW (HP)||22 (30)|